 |
 |
 |
 |
Use this 8.933-023.0 Ceramic Plunger Sleeve Kit to repair the pressure washer pumps shown below.
Cracked or broken ceramic piston sleeves can cause further pump damage if not repaired immediately. Some pump damage can be so extensive as to require replacement of the entire pump. Identification of broken or cracked ceramic plunger sleeves can be difficult, however one sign to look for is milky or caramel colored pump oil, which indicates water has entered the pump body and mixed with the pump oil.
This Ceramic Piston Sleeve Repair Kit includes all components necessary to replace the ceramic plunger for one pump cylinder. Included in the kit is: one ceramic piston sleeve, one piston / plunger bolt, one o-ring and one copper spacer.
This kit for use in the following Hotsy, Landa, Karcher and Legacy pump models:
HOTSY: HM3540, HS3040G, HS335R, HS3540G, HS4040G, HS5030G, HM3540.3, HS3040G.3, HS3540G.3, HS4040G.3, HS5030G.3
LANDA: LM-3540, LS-3040G, LS-3540G, LS-4040G, LS-5030G
KARCHER: KM3540.2, KM3540.3, KS3040.1, KS3540.1, KS4040.1, KS5030.1
LEGACY: GM3540.2, GM3540.3, GS3040G.2, GS3040G.3, GS3540G.2, GS3540G.3, GS4040G.2, GS4040G.3, GS5030G.2, GS5030G.3
REPLACES PART NUMBERS: 70-260823, 89330230
|
|
 |
 |
 |
 |

|