Home > Hotsy Pump Repair Kits > Plunger Oil Seal Kits >

9.802-609.0 Plunger Oil Seal Kit
Hotsy / Landa / Karcher / Legacy Pumps

Pressure Washer Pump Plunger Oil Seal Kit 9.802-609.0 for Hotsy, Landa, Karcher and Legacy Pumps, Replaces 70-260027

Our Price: $19.10

Product Code: 98026090

Add Pump Oil:
Save 10% on Hotsy Pump Oil - 32 oz_8.923-422.0 [Add $10.35]

Add Seal Extraction Pliers:
Save 10% on Pump Seal Extraction Pliers_9.802-568.0 [Add $42.30]

Add Teflon Tape:
Save 10% on Teflon Tape_8.704-705.0 [Add $1.13]

The power washer pump oil seals are installed between the pump manifold and pump body, and are located behind the ceramic plunger sleeves. With normal use, these seals can wear, sometimes causing leakage of the pump oil, which may cause a small puddle of oil to be seen on the frame of the pressure washer, just below the pump. This is a signal that the pump oil seals have worn, and should be replaced immediately to prevent further pump damage.

This 9.802-609.0 Plunger Oil Seal Repair Kit contains 3 oils seals and is for use on the following Hotsy, Landa, Karcher and Legacy pressure washer pump models:

H300, H400, HS340, HC340, HC450, HC460, HC500, HHS335CR, HS335, HHC300, HHC500, HM3540, HM4035, HS3040G, HS3540G, HS4040G, HS5030G

LM-3540, LM-4030, LM-4035, LM-4035H, LM-5030, LS-3040G, LS-3540G, LS-4040G, LS-5030G

KM3540, KM3540.2, KM3540.3, KM4030, KM4030.2, KM4030.3, KM4035, KM4035.2, KM4035.3, KM4035H, KM5030, KM5030.2, KM5030.3, KM6035.2, KM6035.3, KS3040, KS3040.1, KS3540, KS3540.1, KS4040, KS4040.1, KS5030, KS5030.1

GM3540.2, GM3540.3, GM4030.2, GM4030.3, GM4035.2, GM4035.3, GM5030.2, GM5030.3, GM6035.2, GM6035.3, GS3040G.2, GS3040G.3, GS3540G.2, GS3540G.3, GS4040G.2, GS4040G.3, GS5030G.2, GS5030G.3

REPLACES PART NUMBERS: 877655, 70-260803, 87176180, 8.717-618.0, 70-260027, 98026090

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Hotsy Pump Repair Kits > Plunger Oil Seal Kits