Oil Burner Nozzle | 60 Degree Type A Fuel Nozzle
Hot water pressure washers require a precise delivery of diesel fuel to the burner system for proper fuel ignition. These 60 degree Type A fuel nozzles produce a hollow cone design, which means that the fuel droplets are distributed around only the exterior of the cone, leaving the inside of the cone hollow. This design is typically used on power washers that require less than 2.00 GPH (gallons per hour) of diesel fuel being distributed to the burner system. This hollow cone design results in good ignition and low-noise combustion.
Should your power washer require a 60 degree, SOLID Cone spray pattern, please select from our
Type B solid cone spray pattern nozzles.
For proper burner operation and the safety of the pressure washer user, it is important to use only the fuel nozzle size and spray pattern recommended by your pressure washer manufacturer. If you need assistance, please
contact us or call our toll free number,
888-269-0172 prior to placing an order. We have a complete library of Operator's Manuals for nearly all brands of hot water pressure washers, and can assist you in determining exactly what your machine requires.