Home > Hotsy Pump Repair Kits > Ceramic Piston Sleeve Kits >

9.802-614.0 Ceramic Plunger Kit 25mm
Hotsy / Landa / Karcher / Legacy Pumps

Pressure Washer Pump Ceramic Piston Sleeve Plunger Kit 9.802-614.0 for Hotsy, Landa, Karcher and Legacy Pumps, Replaces 877652, 70-260203, 70-260209

Our Price: $81.50

Product Code: 98026140

Add Pump Oil:
Save 10% on Hotsy Pump Oil - 32 oz_8.923-422.0 [Add $10.35]

Add Seal Extraction Pliers:
Save 10% on Pump Seal Extraction Pliers_9.802-568.0 [Add $42.30]

Add Teflon Tape:
Save 10% on Thread Lock Sealant_8.704-644.0 [Add $15.30]

This 9.802-614.0 Ceramic Piston Sleeve Kit is designed to repair broken or cracked ceramic plunger sleeves on the pressure washer pump models shown below.

Ceramic piston sleeves can sometimes be damaged by high temperatures within the pump manifold or pump head. This high temperature heat is typically caused by leaving your power washer running in bypass, without the trigger gun pulled, for extended periods of time. This action cause cause the ceramic piston sleeves to crack or break, which can allow water to mix with the pump oil, or broken shards of the ceramic can be flushed through the system, causing damage to other pressure washer components, such as the unloader / pressure regulator valve, high pressure hoses, and even the spray tip nozzle.

This Ceramic Plunger Replacement Kit includes one ceramic piston sleeve, one plunger bolt, one o-ring and one copper spacer.

Repairs Hotsy, Landa, Karcher and Legacy Pump Models shown below.

HOTSY: H600, H700, HC800, HC950R, HHC950AR, HX8030R, HX1025R, HX1025L, HX5050R, HX5050L

LX-8030, LX-1025

KX8030, KX8030.1, KX1025, KX1025.1

GX1025.1, GX8030.1

REPLACES PART NUMBERS: 70-260209, 70-260203, 877652, 98026140

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Hotsy Pump Repair Kits > Ceramic Piston Sleeve Kits